CARTE Creator3D
2 X DD 9,1 Go
CD
EN PARFAIT ETAT
Ultra[tm] 60 Workstation: Hardware Specifications
* Processor
* Main Memory
* Standard Interfaces
* Internal Mass Storage
* Environment
* Regulations
* Dimensions and Weights
Processor
Number Up to two
Architecture 300-, 360-, or 450-MHz UltraSPARC[tm]-II
Memory management MMU with 64 I-TLB entries and 64 D-TLB entries, 8192 hardware-supported contexts
Cache memory
16-KB data and 16-KB instruction on chip
4-MB external (2-MB for 300-MHz)
UPA Speed 112.5 MHz
Main Memory
Capacities
16 DIMM module slots
Install SIMMs in sets of four. 16-, 32-, 64-, and 128-MB DIMM expansion
2 GB total memory capacity
Memory type 60-ns memory modules
Datapath 576 bits wide
Standard Interfaces
Audio Four audio ports: headphone(out), line-in, line-out and microphone(in) using EIA standard 0.125-inch (3.5-mm) jacks
Ethernet One ethernet/fast ethernet (10BASE-T/100BASE-T) twisted-pair standard connector (RJ-45) or one MII for external transceiver connection
Keyboard and mouse One standard keyboard/mouse port (mini DIN-8)
Parallel One Centronics-compatible parallel port (DB25); ECP mode capable
PCI Four full-size PCI slots compliant with PCI specification version 2.1:
* Three slots operating at 33-MHz, 32- or 64-bit data bus width, 5 volt
* One slot operating at 33- or 66-MHz, 32- or 64-bit data bus width, 3.3 volt
SCSI One 40-MB/sec, 68-pin, UltraSCSI (SCSI-3) (synchronous), 2 channels
Serial Two RS-232C/RS-423 serial ports (DB25)
UPA graphics slot Two UPA graphics slots supporting up to two Sun[tm] Creator3D or Sun Elite3D m3, or one Elite3D m6 and one Creator3D or Elite3D m3 or Sun Expert3D
Internal Mass Storage
Disks Up to two 3.5-x 1-in or x 1.6-in. disks; 4.2-GB, 9.1-GB, 18.2-GB, or 36.4-GB
Floppy Optional 3.5-in. MS-DOS/IBM compatible (720 KB, 1.2 MB, 1.44 MB formatted)
CD-ROM/DVD-ROM
SunCD[tm] 4x, 12x, or 32x 644-MB SCSI CD-ROM
Optional:
* 20-to 40-GB 4 mm DDS-4
* 12-to 24-GB 4mm DDS-3
* 7-to 14-GB 8-mm
* 4-to 8-GB 1/4" SLR
* 4-to 8-GB 4 mm DDS-2
Environment
AC input 100 - 240 VAC, 47 - 63 Hz, 4 A (max), 0.4 K VA
Input power 350 W
Heat output 1194 BTU/hr
Temperature Operating: 10° C to 40° C (50° F to 104° F) without tape drive; 10° C to 35° C (50° F to 95° F) with tape drive
Nonoperating: -20 °C to 60 °C ( -4 °F to 140 °F)
Humidity Operating: 20% to 80% relative humidity, noncondensing
Nonoperating: 5% to 93% relative humidity, noncondensing
Altitude Operating: 3000 m (10,000 ft)
Nonoperating: 12,000 m (40,000 ft)
Acoustic noise Operating: 6.1 bels
Nonoperating: 5.9 bels
Vibration Operating: 0.2G, 5 to 500 to 5 Hz (5 sweeps), 3 perpendicular axes
Nonoperating: 1.0G, 5 to 500 to 5 Hz (5 sweeps), 3 perpendicular axes
Shock Operating: 5.0G, 11 milliseconds, half sine pulse
Nonoperating: 30G peak, 11 milliseconds, half sine pulse
Number of cords 1
Regulations
Meets or exceeds the following requirements:
Safety UL 1950, CSA C22.2 No. 950, TUV EN 60950, CB Scheme Sun Elite3D Graphics with Nordic deviations, EMKO-TSE (74-SEC) 203, ZH1/618
RFI/EMI FCC Class B, DOC Class B, VCCI Class 2, EN 55022 Class B, EN 61000-3-2
Immunity EN 50082-1
X-ray DHHS 21 Subchapter J; PTB German X-ray Decree
Power management Energy Star compliant
|
